Automatic Surgical Face Mask Production Line

The mask machine is made of various layers of masks with certain filtering performance by hot-pressing multi-layer non-woven copper drums, folding forming, ultrasonic welding, scrap removal, welding of ear bands and nose bridge strips, etc. The mask equipment is not a single machine, the c...

Contact:

Cell:+86 13611987503
Whatsapp:008613611987503
Wechat:008613611987503
Skype:rotech-group
Email: info@rotech-group.com

Purchase process:

1

Click apply

2

Fill out the form

3

Waiting for review

4

Contact you

5

Successful

Main description
The mask machine is made of various layers of masks with certain filtering performance by hot-pressing multi-layer non-woven copper drums, folding forming, ultrasonic welding, scrap removal, welding of ear bands and nose bridge strips, etc. The mask equipment is not a single machine, the cooperation of multiple machines completes various procedures.


Main feature
1. The whole machine adopts aluminum alloy structure, which is more beautiful and sturdy.
2. High stability, using the connection board to connect the machine body and the material feeder connector, so that the operation of the entire machine is very stable.
3. Two output lines, high output.
4. Fully automatic outer ear spot welding machine can make mask sheet and external ear welding spot welding part at the same time, which can save labor. Once the non-woven fabric material is used up in the production process, the machine can automatically stop.

1-4_Jc.jpg



Mechanical advantage
1: The two sides of the cutting rubber roller are covered with chrome steel, and the rubber will not break from the side after long-term use.
2: The pulling roller uses a silicone rubber material instead of a nitrile material. Silicone rubber material has good abrasion resistance and will not crack.
3: Mask tension control of nasal bridge strip, this device can avoid different length of nasal band.
4: The nose bridge strip direct feeding device can ensure that the nose bridge strip can be inserted more straight during processing, thereby ensuring that the finished mask is flat and beautiful.
5: Our non-woven raw material sensor, once the raw material is consumed, the machine will automatically stop.
6: Use tension control system, raw material tension controller to avoid material jam, use raw material correction device to do material adjustment.
7: Equipped with static eliminator. Eliminate static electricity on the surface of non-woven masks.
8: There are two sets of ultrasonic welding system in the mask, which are of good quality and stability.
9: PLC control.
10: Photoelectric detection and positioning.

ModelAKZJ
Capacity100-120pcs/min
Voltage220V60Hz
Dimension9000*3600*1800mm(L*W*H)
Mask sizeStandard size 17.5*9.5cm
Power10kw
Weight1700kg

 

1.  Technical service: provide free consultation and suggestion, technical support and service by email/fax/telephone and lifetime technical support.

2.  Customized service: product development and design according to different customer's different requirements.

3.  After-sale service team: technical engineers available to service overseas if needed.

4.  Installation: we can arrange engineers to install machines in customer's factory.

5.  Maintenance: reply will be given within 48 hours once customer inform us any malfunction happened, we can also arrange engineers to customer's factory to main machines.

6.  Training: normal machine is properly adjusted before delivery, you will be able to use the machines immediately and you will be able to get free training advice towards our machine in our factory.

7.  Warranty: one year since the date of delivery.

There are multiple models of one type machine , we need to know more details about your products in order that we can recommend the most suitable machine for you. Our questions as below:

1.  What's your product ? please send one picture to us

2.  What's the dimension or specification of your product ?

3.  What's the filling volume of your product ?

4.  What's the production capacity of your required machines?

5.  If possible , please tell us your production process, we can select the approximate machine according to your requirements.

 

Packing recommend

JH-001
Suitable for loading:Essence
FS-001
Suitable for loading sunbloc
PW-001
Suitable for loading cosmeti
Injection Liquid
Injection liquid
HT-002
Suitable for loading skin ca
PM-002
Suitable for loading foam cl
Interpharma
Best possible values for our
PP-005
Bottle caps
Top

Apply
For

Offer Consulting

400-931-8290

Apply Online