Shanghai ROTECH biological USES the principle of reverse osmosis to purify raw water, is a popular method to prepare pure water, Shanghai red deer biological biological engineering co., ltd. produced pharmaceutical preparation purification water equipment with small area, high effluent quality, low operating cost, has become a popular product in the water treatment industry.
Water quality standards for water purification equipment for pharmaceutical preparations
1. The drinking water shall conform to the national standard of the People's Republic of China, the hygienic standard for drinking water.
2. The purified water shall comply with the purified water standards in the Chinese pharmacopoeia 2010. In the water-making process, the resistivity of purified water is usually measured online to reflect the concentration of various ions in the water. Resistivity of the pharmaceutical industry of purified water usually acuity 0.5 M Ω. CM / 25 ℃, for injection, eye drops container flush with the resistivity of purified water should be 1 M or more Ω. CM / 25 ℃.
Water purification equipment for pharmaceutical preparations
GMP requirements for water purification equipment for pharmaceutical preparations
1. Structure design should be simple, reliable, easy to disassemble and assemble.
2. In order to facilitate the disassembly, replacement and cleaning of parts, the design of the actuator shall adopt standardized, universal and systematic parts as far as possible.
3. The surface of the inner and outer wall of the equipment should be smooth, without dead corner, easy to clean and sterilize. The surface of parts should be treated with chrome plating to resist corrosion and prevent rust. Avoid painting the outside of the equipment to prevent peeling.
4. The equipment for preparing purified water shall be made of low-carbon stainless steel or other materials that have been proved not to pollute the water quality. The equipment for preparing purified water should be cleaned regularly and the cleaning effect should be verified.
5. The materials in contact with the water for injection must be high-quality low-carbon stainless steel or other materials that have been proved not to cause pollution to the water quality. The equipment for preparing water for injection shall be cleaned regularly and the cleaning effect shall be verified.
